If you’re searching for double girder EOT crane price in India, the honest answer is “it depends.” Depends on your capacity, your span, your lifting height, and how hard you’re going to run it every single day. There is no one-size-fits-all number, and any manufacturer quoting you a fixed price without asking these questions first, walk away. This guide breaks it all down simply, so before you speak to a single supplier, you already know exactly what you need, what to ask, and what a fair price looks like in today’s Indian market.
So What Exactly is a Double Girder EOT Crane, and Why Does It Matter?
A double girder EOT crane, electric overhead travelling crane, uses two parallel bridge girders instead of one. The hoist and trolley sit on top of the girders rather than hanging below, which means you gain significantly more hook height. In a factory where every meter of lift matters, that difference is everything.
The main components are straightforward: two bridge girders, an end carriage on each side, a crab trolley that travels cross-wise, an electric hoist (wire rope or chain), and an electrical system that today increasingly comes with Variable Frequency Drives (VFDs) for smooth, precise speed control.
The real question most buyers ask is, single girder vs double girder EOT crane: which one do I actually need? If your loads are under 10 ton and your span is under 20 metres with no extreme duty requirements, a single girder works fine and costs less. But the moment you cross 10 ton, need higher hook height, have a wide-span bay, or run the crane intensively through the day, a double girder is not a luxury; it is the correct engineering choice.
| Feature | Single Girder | Double Girder |
| Capacity Range | Up to 10 Ton | 5 Ton to 500 Ton+ |
| Lifting Height | Limited | High – hoist sits on top |
| Span Range | Up to 20m | Up to 40m+ |
| Duty Class | Light to Medium | Medium to Heavy |
| Cost | Lower | Higher |
Which Industries and Capacities Is It Built For?
Double girder EOT cranes are the backbone of heavy Indian industry. You’ll find them running in steel rolling mills, automobile press shops, foundries, paper mills, power plants, shipyards, and large-scale fabrication units. Any place where loads are heavy, cycles are frequent, and downtime is expensive.
Here is how capacity maps to real-world applications:
- 5-10 Ton: Engineering workshops, general fabrication, component assembly lines. Single girder competes here, but double girder is preferred when lifting height or span demand it.
- 10-20 Ton: The most common range in Indian factories. Automobile manufacturing, structural steel yards, pipe handling, and press shops. This is where double girder becomes the default recommendation.
- 20-40 Ton: Heavy forging, heat treatment furnaces, coil handling, and precast concrete yards. Requires M5-M6 duty class in most cases.
- 40 Ton and above: Power plants, cement plants, heavy engineering, and continuous process industries. Engineered entirely to site specifications with M7-M8 duty class.
What Drives Double Girder EOT Crane Price in India?
The double girder EOT crane cost in India is a function of several variables, and understanding each one stops you from comparing two completely different machines on price alone.
- Capacity: Heavier the load, heavier the structure, higher the cost.
- Span: Every extra metre of girder length adds material and design weight directly.
- Lifting Height: Affects hoist specification and rope drum size.
- EOT Crane Duty Class: An M3 crane and an M6 crane of the same capacity are not the same machine. This is the most underestimated factor.
- Hoist Type: Wire rope vs chain hoist, Indian vs imported brand.
- Electrical Features: VFDs, radio remote, anti-sway, PLC controls, overload protection.
- Installation Scope: Runway fabrication, cabling, commissioning, and load testing all add to total project cost.
Double Girder EOT Crane Price Range in India – 2026
Segment | Capacity | Price Range (Approx.) |
| Entry Level | 5-10 Ton | ₹8 Lakh – ₹22 Lakh |
| Mid Range | 10-25 Ton | ₹22 Lakh – ₹60 Lakh |
| Heavy Duty | 25 Ton – 50 Ton+ | ₹60 Lakh – ₹1.5 Crore+ |
These are market indicative figures. A 20 ton double girder EOT crane price for a 22-metre span with M5 duty class and VFD drives will sit very differently from the same tonnage crane with basic controls and a 12-metre span. Always get a quotation based on your actual technical drawings.
How to Select the Right Double Girder EOT Crane for Your Factory
The right double girder EOT crane selection starts with six honest questions about your own operation:
- Maximum Lift Load: Include hook block, slings, and lifting attachments, not just product weight.
- Daily Operating Hours: This determines your EOT crane duty class. Do not guess this number.
- Material Type: Coil, slab, loose goods, or molten metal; each has specific hook and hoist requirements.
- Bay Width & Headroom: Measure your shop floor span and available headroom accurately before approaching suppliers.
- Future Expansion: If expansion is planned, buy 20–30% above today’s requirement.
- After-Sales Support: Confirm what the double girder EOT crane manufacturer in India actually offers – AMC, spare parts lead time, and local service network.
Before You Sign the Purchase Order – Buyer Checklist
Working with the right double girder EOT crane manufacturers in India matters as much as the crane specifications. Before finalising:
- Manufacturer has minimum 10 years of EOT crane manufacturing experience.
- Technical site visit and load calculation done before quoting.
- Load test certificate at commissioning as per IS 3177 / IS 807 – non-negotiable.
- Customisation capability confirmed for your span, duty class, and control preferences.
- Spare parts availability and committed delivery lead time in writing.
- Local service network verified – a crane with no nearby service engineer means production loss.
Frequently Asked Questions
1. What is the price of a double girder EOT crane in India?
Price starts from around ₹8 lakh for a basic 5–10 ton double girder EOT crane and goes beyond ₹1.5 crore for 50 ton+ heavy-duty configurations. Exact pricing depends on span, duty class, and site requirements.
2. Should I choose single girder or double girder for 10 ton capacity?
If lifting height is standard and duty is light to medium, single girder works. For higher hook travel, wider span, or M4+ duty class, a 10 ton double girder EOT crane is the correct choice.
3. What is EOT crane duty class?
Duty class (M3 to M8) defines how intensively the crane operates daily. Higher class means more robust components. Selecting the wrong EOT crane duty class is the most common — and most expensive — buying mistake.
4. What should be the maintenance schedule for a double girder EOT crane?
Routine inspection every 500 operating hours, full preventive maintenance every 6 months, and annual load test as per IS 3177 and IS 807 standards.
5. What is included in EOT crane installation?
Typically: runway alignment, crane erection, electrical cabling, trial run, and load test certificate. Runway beam fabrication is usually quoted separately depending on site conditions.